Flat Bed CNC Lathe Machine CK6132/500

The main performance characteristics:

• CNC lathe machine is controlled by micro- computer and driven by servo motors

• Suitable for turning cylindrical and taper faces, boring, grooving and cutting threads;

• Adopts ISO international code with keyboard manual data input;

• Will be provided with program of power cut-off protection;

• Automatic functions of diagnosis and USB/RS-232 interfacing;

• Provision to select 4 station tool post as well gang tool;

• Tool post is located on precision contrite gears with a high repeated position accuracy;

• Infinitely variable speed change for spindle;

• LCD display is integrated with CNC controller for network facility;

• 100Mbps Ethernet is embedded with CNC controller for network facility;

• High speed data transfer between controller and machine;

• NC programs can be stored in controller;

• Memory operation and program editing facility in the controller;

• 100Mbps Ethernet is embedded with CNC controller for network facility;

• CNC controller supports G-code, M-code and ISO code;

• CNC controller supports various machining cycles;

• CNC controller uses high- speed microprocessor for speedy data processing;

• CNC controller supports power source regeneration for energy saving;

• CNC controller has built-in tool management data table for managing tools;

• CNC controller supports English and other languages;

• CNC controller adopts error correction code to correct the errors during data transfer;

GSK 980TDi Controller Configuration:

Product introduction:

• This is a new upgraded software, its software, its structure horizontal and vertical, matched with 8.4-inch color LCD, with 5 feed axes (including C axis), 2 analog spindles, least input increment 0.1μm. It uses the graphic interface, friendly human-machine operation window. It can realize the PLC on-line display, real-time monitoring and MPG trial-cut function. X, Z, Y, 4th, 5th; axis name and axis type of Y, 4th, 5th can be defined

• 2ms interpolation period, control precision 1μm, 0.1μm

• Max. speed 60m/min (up to 24m/min in 0.1μm）

• Adapting to the servo spindle to realize the spindle continuously positioning, rigid tapping, and the rigid thread machining

• Built-in multi PLC programs and the PLC program currently running can be selected

• G71 supporting flute contour cycle cutting

• Statement macro command programming, macro program calls with parameter

• Metric/inch programming, automatic tool setting, automatic chamfer, tool life management function

• English display can be selected by parameters.

• USB interface, U disc file operation, system configuration and software

• 2-channel 0V~10V analog voltage output, two-spindle control

• 1-channel MPG input, MPG function 

• 41 input signals and 36 output signals

Technical specification:

• Controllable axes: 5 (X, Z, Y, 4th, 5th)

• Link axes: 3

• PLC controllable axes: 3 (X, Z, Y, 4th, 5th)

• Feed axis function:

• Least input increment: 0.001mm (0.0001inch) and 0.0001mm (0.00001inch)

• Least command increment：0.001mm (0.0001inch) and 0.0001mm (0.00001inch) 

• Position command range: ±99999999× least command unit

• Rapid traverse speed: max. speed 60m/min in 0.001mm command unit, max. speed 24m/min in 0.0001mm command unit

• Rapid override: F0, 25%, 50%, 100%

• Feed rate override: 0~150% 16 grades to tune 

• Interpolation mode: linear interpolation, arc interpolation (three-point arc interpolation), thread interpolation, ellipse interpolation, parabola interpolation and rigid tapping

• Automatic chamfer function

• Thread function:

• General thread (following spindle)/rigid thread

• Single/multi metric, inch straight thread, taper thread, end face thread, constant pitch thread and variable pitch thread

• Thread run-out length, angle, speed characteristics can be set 

• Thread pitch: 0.01mm~500mm or 0.06 tooth/inch~2540 tooth/inch

• Acceleration/deceleration function:

• Cutting feed: linear

• Rapid traverse: linear, S

• Thread cutting: linear, exponential

• Initial speed, termination speed, time of acceleration/deceleration can be set by parameters

• Spindle function:

• 2-channel 0V~10V analog voltage output, two-spindle control 

• 1-channel spindle encoder feedback, spindle encoder line can be set (100p/r~5000p/r)

• Transmission ratio between encoder and spindle: (1~255) : (1~255)

• Spindle speed: it is set by S or PLC, and speed range: 0r/min~9999r/min

• Spindle override: 50%~120% 8 grades tune 

• Spindle constant surface speed control

• Rigid tapping

• Tool function:

• Tool length compensation

• Tool nose radius compensation (C)

• Tool wear compensation

• Tool life management

• Tool setting mode: fixed-point tool setting, trial-cut tool setting, reference point return tool setting, automatic tool setting

• Tool offset execution mode: modifying coordinate mode, tool traverse mode

• Precision compensation:

• Backlash compensation

• Memory pitch error compensation

• PLC function:

• Two-level PLC program, up to 5000 steps, the 1st program refresh period 8ms

• PLC program communication download

• PLC warning and PLC alarm

• Many PLC programs (up to 16PCS), the PLC program currently running can be selected

• Basic I/O: 41 input signals /36 output signals

• Man-machine interface:

• 8.4″ wide screen LED, resolution: 640×480

• English display, Planar tool path display and 

• Real-time clock

• Operation management:

• Operation mode: edit, auto, MDI, machine zero return, MPG/single, manual, program zero return

• Multi-level operation privilege management

• Alarm record

• Program edit:

• Program capacity: 40MB，384 programs (including subprograms and macro programs)

• Edit function: program/block word search, modification, deletion

• Program format: ISO command, statement macro command programming, relative coordinate, absolute coordinate and compound coordinate programming

• Program call: macro program calls with parameter, 4-level program built-in

• Communication function:

• RS232: two-way transmitting part programs and parameters, PLC program, system software serial upgrade

• USB: U file operation, U file directly machining, PLC program, system software U upgrade

• Safety function:

• Emergency stop

• Hardware travel limit

• Software travel check

• Data backup and recovery

• Environment and conditions:

• Storage delivery, working environment as follows:

• Working conditions:

• Ambient temperature: 0℃~45℃

• Ambient humidity: ≤90% (no freezing)

• Atmosphere pressure: 86 kPa~106 kPa

• Altitude: ≤1000m

• Storage delivery conditions:

• Ambient temperature: -40℃~+70℃ 

• Ambient humidity: ≤95% (40)

• Atmosphere pressure: 86 kPa~106 kPa

• Altitude: ≤1000m

• Power supply:

• AC input power supply.

• Voltage: within (0.85~1.1) × 200V (rated AC input voltage);

• Frequency: 49Hz~51Hz continuously changing 

Supplied with following accessories:

• 4-position electric tool post

• 3-jaw manual chuck

• Manual tailstock

• Tailstock center

• External and Internal thread cutter

• Side cutter, Boring cutter, Slot cutter

• Half cover, inverter spindle

• Standard accessories with printed operational manual

Application：

1. This machine is widely used in processing and manufacture the electric appliance, instrumentation industry, automobile, motorcycle, fastener bearings, photographic and film machinery, hardware tools, watches, glasses, stationery, motors, valves and gas pipe and other high precise and complex components.

2. It is the ideal high efficient equipment in the hardware machining industry.

Product main technical specifications: